IIAC2014 Articles

abstract-book2014

To download PDF file click here.

Articles list

Casting
Effects of SiC Particle Content and Stirring Temperature on the Tensile Properties of Al-SiCp Composites Fabricated by Semisolid Stirring Route
Hamed Khosravi, Hamed Bakhshi, Mina Sadat Mousavi   
Microstructural studies of Ti-refined Al2014 alloy prepared by SIMA process
M. Amuei, M. Emamy, R. Khorshidi, A. Akrami
Effect of Al–15Zr master alloy on the microstructure of a 2007 aluminum alloy produced by strain-induced melt activation (SIMA) process
H. Karimi jafari, A. razaghian, M. Emamy, A. B. Eradi-Zare
Effect of Gas Induced Semi-Solid process (GISS) on microstructure of A380 aluminum alloy
M. Honarmand, S.G. Shabestari, H. Saghafian
Behaviour of centrifugally cast 208.0 aluminum alloy at different pouring temperatures
S.Zaremanesh, A.Halvaee
Effect of Al–15Zr master alloy on the microstructure and tensile properties of extruded Sc-free 7042 Al alloy
N. Ataee, M. Emamy, J. Rasizadeh
Effect of Cooling Rate and Grain Refinement on the Microsegregation in Al-4.8 wt.% Cu Alloy
M. Dehnavi, M. Haddad-Sabzevar, H. Vafaeenezhad, M.H. Avazkonandeh-Gharavol
A Study in Crack Appearance in 1050 Aluminium Alloy Rivets
Hassan Ranjbar Robati, Hossein Abdous, Seyed Mohammad Ali Boutorabi
Exploring the World of Aluminium Conductors
Carmelo Maria Brocato,
Investigation the solidified layer in compound casting the A390/A356 alloys
M.Mohammadi rahvard, M.Tamizifar, M.A.Boutorabi
The Effect of Cu on the Microstructure and Tensile Properties of Near Eutectic Al-Mg2Si Alloy
S. Karimi Aghda, M. Emamy, K. Tavighi, T. Madadkar
Microstructure and Grain Refining Performance of a new type of Al-Ti-C Master Alloy
Vahid Hassanbeygi, Ali Shafyei
Influence of melt superheating on microstructure evolution in Al-Mg2Si composites fabricated by gravity casting and vibrating cooling slope methods
Shaya Saffari, Farshad Akhlaghi
Effect of Zr on the microstructure of 6061 Aluminum alloy during SIMA process
R. Khorshidi, M. Emamy, A. Akrami, M. Amuei
Increasing of the melt quality in Al-Si-Mg alloys by remelting
G. Eisaabadi, H. Momeni, M. Noori
An apparatus for real time study of free dendritic growth: Design, manufacture and testing
Mohamad Reza Nasresfahani, Behzad Niroumand, Ahmad Kermanpur
The effect of Ti content on microstructure and tensile properties of 6070 Al Alloy after and before extrusion
M. Mostafapour, M. Emamy, J. Rassizadeh
Effect of Cu on Microstructure and Impression Creep Properties of  Al-9Si alloy
M. Yousefi, M. Dehnavi, S.M. Miresmaeili
Experimental Analysis of Partition Coefficient in Al-Mg Alloys
M.H. Avazkonandeh-Gharavol, M. Haddad-Sabzevar, H. Fredriksson

Effects of casting parameters on fluidity of cast LM24 aluminum alloy
Emran Emami, Mostafa Hosseini Koupaie, Behzad Niroumand
Investigation on the Thermal Resistant of Al –Zr Alloy (AT1) for the Electrical Purposes
Parviz Mohammad Partovi, Maziyar Azadbeh, Saeid Mostaghim Bakhshaiesh, Ahad Mohammadzadeh
Effect of Melt/Insert volume ratio and pouring temperature on Al/Cast Iron interface in compound casting process
Mehdi Akbarifar, Mehdi Divandari
Effect of Melt/Insert volume ratio and pouring temperature on Al/Al alloy interface in compound casting process
Mehdi Akbarifar, Mehdi Divandari
The Effects of Aluminum Oxide Particle Size on Coating of Ceramic Monoliths
Shahram Ghanbari Pakdehi, Mozaffar Salimi, Maryam Rasoolzadeh, Mojtaba Abbasi
Vortex Phenomena Effect in Vertical Non-Pressurized Bottom Gating System in A356 Alloys
Ali kheirabi, Morteza Tamizi far, Amir Baghani, Ahmad Bahmani, Parviz Davami
A study on common quality problems  in Al continuous roll casting process
M.Khoshakhlagh . E.Rastegarfatemi

Metalworking and Mechanical Properties
On the effect of starting point on the edge waviness of cap in laser forming process
Masoud Abbaszadeh, Mohammad Hosseinpour Gollo, Esmaeel Yucefzadeh
Mechanical properties of multilayered Al/Cu/Zn produced by accumulative roll bonding
Mohammad Ali Heydarzade, Amir Hasani, Mahdi Saghafi
Response surface modeling and optimization of equivalent plastic strain in equal channel angular rolling
R. Nemati Chari, A. Kami, B. Mollaei Dariani
Dynamic and Static Softening Behaviors of Al-6%Mg Alloy during two-stage Hot Compression Deformation
Gholamreza Khalaj, Mohsen Nazer-Fakhari, Behrooz Paranj, Abolfazl Sameni
Effect of cold working amount and annealing temperature on softening kinetics of commercial purity aluminum
M. Piriaee, M. Pazhuhandeh, A. Farzadi
A novel method for ironing of pure aluminum cups with a higher thickness reduction
A. Shirazi, K. Abrinia
Springback prediction by using a combined hardening model
M. A. Yegane, M. Kadkhodayan
A Single Specimen Analytical Method to Evaluate Crack Growth Rate of 7050 Al-alloy at Elevated Temperature
P. Abachi, K. Purazrang and P. Musavi Gharavi
Experimental and Theoretical Analyses of Deformation during the Rolling Process of Explosively-welded Tri-layer Strips
M. M. Hoseini Athar, B. Tolaminejad
Enhanced superplasticity in AA2024 aluminium alloy processed by multiple compressions in a channel die
H.R. Ghorbanzadeh, A. Rezaee-Bazzaz.
Improving the Forming Pressure Curves in Tube Hydroforming Process for AA1050 Alloy at Various Temperatures
S. J. Hashemi, H. Moslemi Naeini, G. h. Liaghat, F. Rahmani, R. Azizi Tafti
Sheet EMF using convex punch instead of concave die
E. Eshghi, M. Kadkhodayan
Investigation of the microstructure evolution of Al 1050 alloy in cross-rolling process by transmission electron microscopy
Mohsen Asadi Asadabad, Mohammad Jafari Eskandari, Reza Tafrishi
Effect of die channel angle and friction coefficient in ECAP-Conform process for Al-6061 alloy
J. Gholami, M. Pourbashiri, M. Sedighi
Sever plastic deformation of AA1050 and AA6063 alloys using pure shear extrusion
F. Rahimi, A.R. Eivani, M. Kiani and S.F. Razavi
Microstructural stability in ultrafine grained AlMg0.7Si alloy produced by equal channel angular pressing
Sh. Valipour, A.R. Eivani, S.H. Seyedein, M. Aboutalebi
Influence of precipitation hardening on mechanical properties of un-deformed and sever plastic deformed AA6063
Bahman Mirzakhani, Mostafa Mansourinejad, Yousef Payandeh

Heat Treatment
Double-peak age strengthening of cold-worked 2024 aluminum alloy
Amin Salehi Mobarakeh, Alireza Mashreghi, Masoud Mosalayipur
Qualification of precipitation hardening of aluminum alloys by using non-destructive ultrasonic techniques
Meysam Toozandehjani, Faizal Mustapha, Mohd Khairol Anuar Ariffin, Nur Ismarrubie Zahari, Khamirul Amin Matori, Firouz Fadaeifard, Farhad Ostovan
Theoretical and Experimental Studies of a Fixed bed Regenerator for Heat Recovery in Aluminium Melting Furnaces
H. R. B. Ajdari, S. M. Sadrameli, M. Nowi, M. Shamloo, A. Mirahmad
Effect of Retrogression Time of RRA Heat treatment on Mechanical Properties of 7055 Aluminum Alloy
M. Shakouri, M.Esmailian, S.G. Shabestari, A. Mottahedi
Prediction and control of microstructural evolution and mechanical properties in deformed aluminium during heat treatment process
H.R. Rezaei Ashtiani, M. Delavar, P. Karami

Intermetallic phase formation during the heat treatment of explosively welded Al/Cu bimetals
Hafez Amani Orjaliloo, Mansour Soltanieh

Quality Control of Precipitation Hardened Aluminium Alloy Parts via Eddy-current Non-destructive Evaluation
Ali Abbasian, Mehrdad Kashefi, Esmaeel Ahmadzade Beyraki
Influence of Li addition on the microstructure of in-situ Al-30 wt. % Mg2Si composite
Asiyeh Montajabnia, Ali Nemati, Massoud Emamy
The effect of a novel solution treatment on microstructure and mechanical properties of AA7075 using the Taguchi method
Seyed Mahmoud Bayazid, Hassan Farhangi

Advanced Materials
The effects of heat treatment and antimony addition on the microstructure and wear properties of Al-15%Mg2Si metal matrix composite
A.Akrami, M. Emamy, M. Amuei, R. Khorshidi
Production of Al8090/SiCp composites and study of their wear characteristics after age hardening with prior directional quenching
Amir Kebriyaei, Seyed Shamsedin Mirdamadi, Hassan Saghafian
The study of Zn effect on the microstructure and tensile properties of cast Al-15% Mg2Si-3% Cu composite
F. Samadi, M. Emamy, A. Honarbakhsh Raouf, Navid Ataee
Effect of Cu-P master alloy on the microstructure and wear behaviour of Al-25wt. %Mg2Si Metal matrix Composite
Ehsan Vaziri Yeganeh, A. Razaghian, M. Emamy, A. Akrami
An investigation on microstructure properties of Al6061/Al2O3 nanocomposite in as-cast state and in extruded condition
Hamid Reza Ezatpour, Seyed Abolkarim Sajjadi, Mohsen Haddad Sabzevar, Yizhong Huang, Y. Bolou, Z. Bowie
Fractography of Al6061/Al2O3 nanocomposites fabricated by stir-casting process
Hamid Reza Ezatpour, Seyed Abolkarim Sajjadi, Mohsen Haddad Sabzevar, Yizhong Huang
Fabrication of Carbon nanotubes reinforced Aluminum nanocomposite with extra adhesion of nanotubes to the matrix
S. Khorasani, H. Abdizadeh, S. Heshmati-Manesh
Investigation of Microstructure and Mechanical Properties of Al/nano-Al2O3 Composites Fabricated by ARB Process
S.Biabangard Barani, S.A.Sajjadi
Effect of Boron on the Microstructure and Mechanical Properties of Al-20 wt.% Mg2Si In-situ Composite
Shaghayegh Gharahgozloo, Massoud Emamy, Shadi Ardekani
Evaluation of microstructure and mechanical behavior of A356- (nano/micro) Al2O3 composite fabricated by stir casting
S. Zobaidy, Z. Sadeghian, B. Lotfi
An Investigation of Tribological Properties of Al-Al2O3 Composites Fabricated by Spark Plasma Sintering Method
Sh.Pourhosseini, M.Khafi, D.Khademi, A.Babakhani, A.R.Kiani-Rashid
Effects of hot Extrusion on the Microstructure and Tensile Properties of Al – 25 wt.% NiAl3 In-Situ Metal Matrix Composite
A. B. Eradi-Zare, M. Emamy, K. Tavigh
The effect of micro and nano scale SiC reinforcements on the mechanical and energy absorption behaviour of produced Aluminium foams with PM
Nima Movahedi, Maral Afshar, Mohammad Hossein Mirbagheri
Microstructure and hardness evaluation of Al-SiO2 nanocomposites produced with ultrasonic technique
A. Salehi, A. Babakhani, S. Mojtaba Zebarjad
Improving tribological and corrosion properties of Aluminum-CNT surface nano composite fabricated via Friction Stir Processing
E. Montazerozohour, M. Mosallaee, S. Ghasemi, A. Mashreghi,
Effect of Ni Addition on Microstructure and Tensile Properties of In-Situ Aluminium Metal Matrix Composite Containing Al4Sr after Hot-Extrusion
J. Ranjbar , M. Emamy, H. Majdi

Study of Morphology and Composition of Nickel Coatings on Aluminum Anodic Oxide
M. Nozari Nezhad, A. Kolahi, M. Kazemzad, M. saiedifar
Effect of preform mean pore size on mechanical behavior of aluminium-alumina interpenetrating phase composite fabricated by infiltration method
H. Saidi, F. Mohamadkhani, G. Roudini, M. Shafiee Afarani
Study of the Fabrication Parameters of Al2O3-Mullite-SiC Composite with Carbothermic Reduction of Aluminosilicate Materials Used in Aluminum Industry
P.Seifollahzadeh, M.Kalantar, A.mashreghi, S.S.Ghasrmi
Bench Scale Study of the Extraction of Gallium from  Jajarm Bayer Process liquor
Hojat Naderi, Mahmoud Abdollahy
Gallium Extraction from Jajarm Bayer Process LiquorUsing Microemulsion Method
Hossein Amani, Hojat Naderi

Welding and Joining
A Novel Aluminum Brazing Technique with Al-Cu, As a Filler Material
Hossein Zare, Behdad Dadashkhani, Masoud Goodarzi
Effect of  Simultaneous Cooling on Temperature Field in Friction Stir Welding Process of Aluminium Alloy
N. Jalili, H. Basirat Tabrizi, I.Sattarifar
Joining of Al-Foam to plate by Al-Zn-Mg powders as an interlayer
Arvin Taghizadeh Tabrizi, Maziar Azadbeh
Effect of process parameters on friction welding of aluminum alloy
S.M.Tahsini, A.Halvaee b
Investigation on Transient Liquid Phase Bonding inAl2024 Aluminium Alloy with Ga Interlayer
H. Gheisari, S.G. Shabestarib, H. Saghafianc, H. Momenid, M. Amne ElahiaBahonar
Friction Stir Welding of AA7075 Aluminum Alloy: Influences of Process Parameters
M. Bahmani, A. Farzadi, Kh. Gheisari
Effects of heat input and different types of welding current on the microstructure and mechanical properties of TIG weld joints of a modified Al-Mg-Si cast aluminum alloy
A. Tahmasbi Birgani, A. Halvaei, F. Shirazi
Influence of welding parameters on microstructure and mechanical properties of friction stir welded Al-Mg2Si metal matrix composite
A. Moharrami, A. Razaghian, M. Emamy
Influence of tool pin geometry on microstructure and mechanical properties of friction stir welded Al-Mg2Si metal matrix composite
A. Moharrami, A. Razaghian, M. Emamy
Increasing the strength of the weld zones by in situ synthesis of hard phases of Al-Ni binary system during the FSSW process
Sh. shahsavar fard, J.Vahdati Khaki, M. Haddad Sabzevar

Corrosion and Surface Treatment
Laser surface alloying of aluminum with chromium powder by pulsed Nd:YAG laser
M. Ansari, M. Heydarzadeh Sohi, R. Soltani, M. J. Torkamany
Effect of high temperature oxidation on the corrosion behavior of aluminized low carbon steel in molten aluminum
Ayeh Mohsenifar, Mohammad Reza Aboutalebi, Seyed Hossein Seyedein
The Effect of Silicon on the Interfacial Microstructure Evolution of Aluminized Low Carbon Steel
Negar Moradi Ghadi, Fatane Telikani, Hafez Amani Orjaliloo, Mansour Soltanieh
EIS Studies of Solution-Annealed 316 and 316L SS to Comprehend the Damage Mechanism at Different Potentials of Transpassive Region
Khashayar Morshed Behbahani, Mahmoud Pakshir, Zahra Abbasi

Influence of spot size and scan speed on laser surface alloying of Cu on Al substrate
S.A. Vaziri, M.T. Roshanzamir, R. Hashemi
Effect of 10 vol.% SiC reinforcement on the corrosion behaviour of A356 aluminium alloy in basic solutions
A. Fattah-alhosseini, M. Ranjbaran, S. Vajdi Vahid
Investigating  the anodizing process of Aluminum alloys in 0.3M Oxalic acid and its metallurgical and mechanical behavior
Saeid Akhavan, Amin Rabiei Baboukani, Ahmad Saatchi, Reza Ebrahimi Kahrizsangi, Saeid Shirmohammadi, Mohammad Nourmohammadi, Ahmad Tahvilian
Effect of pH on corrosion behavior of aluminum alloy 5083 in Persian Gulf synthesized water
A. Bakhtiarinejad, Kh. Ranjbar, A. Ashrafi, B. Rezaeic
The Effect of Aluminum Activity on the Properties of Modified Aluminide Coatings Produced by Pack Cementation Process on IN738
Iman khakpour, Reza soltani, Mahmoud heydarzadeh sohi, Mahdi Bozorg Nezhad Nobijari
The Effect of ARB Process on the Anodizing Behavior of Aluminum and its Composite with SiC Particles
Mahnam Ebadi, M. H. Paydar
Studying the inhibitive performance of nanostructured spinel pigments doped with Ce, Co and Mn cations on the corrosion of aluminum alloy 1060
E.Ghasemi, B.Ramezanzadeh, S.Saket
Corrosion Resistant Sol–gel Coating on 2024-T3 Aluminum
Sedighe Yazdani, Sirus Javadpour, Shirin Mehdizadeh naderi, Mehdi Javidi

Raw Materials and Reduction Technology
Petroleum Coke; a Critical Raw Material for Aluminum Industry
Sahar Baniyaghoob and Mohammad Aghajanlou

Optimum Feed Stream Candidates in Iran for Producing Petroleum Coke
Saeed Soltanali, Sahar Baniyaghoob, Rahmatolah Golpasha, Javad Ivakpour
Producing high temperature Aluminum-Zirconium wire Rod for first time in Iran- Specifications & Applications
Akbarshahi, A. Yousefi, N. Javadi
The Effect of heigh metal pad and low electrolyte in optimal process in 200 KA pre bake electrolyse Aluminium
Soheil Asadi, Mohammad reza Taghizadeh Milani
Optimization of Cleaning Evaporator Tubes in Bayer Process
Morteza Shamsi, Iraj Takbiri, Mahmoud Pilehvari
Technical and economic studies Continuous Dense Phase feed system  (Almahdi Hormozal Aluiminium smelter Case Study)
Alireza Samimi, borzu bahrvand, Mohsen Ameri Siahooei
Study Finer Fines In Anode Formulation (Case Study: Almahdi Hormozal Aluminium Smelter)
Alireza Fardani, Mohsen ameri siahooei, Mahmood Taheri Zadeh
Application and Discussion for New Technology of Large Pre-baked Electrolytic cell
Sun Jing, Ai Zijin
Study on Site Selection Scheme for 1,600 kt/a Iranian Alumina Plant
Sun Jing, Ai Zijin
Fabrication and Characterization of Nickel Ferrite Based Inert Anodes for Aluminum Electrolysis
P. Zarrabian, M. Kalantar, S.S. Ghasemi
Investigations on the Influence type of alumina on solid state reaction of alumina and magnesia in bauxite-based refractory castables
Saeed Zare, Ahmad Monshi, Ali Saidi
Green Anode Plants For Primary Aluminium “Mega”-Smelters
Manfred Beilstein

Simulation and Automation
Simulation of heat transfer with phase transformation in dissimilar laser beam welding of Aluminum and Magnesium sheets in limited conduction mode
Sobhan Emad Mostofi, Mohammad Reza Aboutalebi, Seyed Hossein Seyedein
A model for prediction of softening kinetics and microstructures during isothermal annealing of cold-rolled aluminum alloy
S. ShabaniVerki , S. Serajzadeh
Evaluation of forging parameters on Al-7075 aircraft door bracket by simulation
E.Barati, Kh.Farmanesh, A.Soltanpour
Adsorption of Fluoride Gases in Aluminum Production using Nano Technology
Kambiz Bordbari, Mohsen Ameri Siahooei, Ahmad Irannejad, Gholam Reza Khayati
Finite Element Simulation of Aluminium Flange Fabrication Using Explosive Forming
H. Vafaeenezhad, M. Reza Afshar, S. H. Seyedein, M. Reza Aboutalebi
Thermo-mechanical responses, mechanical properties and microstructural evolution during hot and warm rolling of AA5086
A. Asgharzadeh, S. Serajzadeh
Effect of pouring temperature on hot-tearing susceptibility of A206 alloy
Mohamad Reza Nasresfahani, Mohamad Javad Rajabloo
Finite element simulation of heat transfer in friction stir welding of Al 7050
Ehsan Gharibshahiyan, Abbas Honarbakhsh Raouf
Design and construction of simulator of aluminum electrolysis cells intelligent feeding
Jafar Aghazadeh, Leila Najafi, Abbas Hamedi, AlirezaMotamadnia
Marking and Tracking in Aluminium Cast Houses and Rolling Mills
Jörn Arndt; Mohammad Khoozestani*, Alireza Khoozestani

Powder Metallurgy
On the reactions in ilmenite, aluminum and graphite system
Razieh Khoshhal, , Mansour Soltanieh, Mohammad Ali Boutorabi
Feasibility of mechanical coating of Al substrate with metallic and non-metallic powders
Arash Yazdani, Alireza Zakeri
Strengthening of steel/Al foam sandwich tube interface through in situ synthesis of Al/Ni Intermetallics
Mohammad Mahdi Baloochian, Jalil Vahdati Khaki, Seyyed Abdolkarim Sajadi
The role of heat treatment on mechanical properties of sintered Alumix 431
Maziyar Azadbeh, Herbert Danninger, Ahad Mohammadzadeh
The Effect of Milling Time on the Microstructural Features of Al-10%Al3Mg2 Nanocomposite Fabricated by Mechanical Alloying
Hossein Ramezanalizadeh, Masoud Emamy

Miscellaneous
A success story in the Middle East Aluminium Market for Fives
Christian GONZALEZ
Opportunities, Challenges and Potential Markets in Iran Aluminium Industry: A Case Study of Kaveh Khuzestan Aluminium Company
Seyyed Abbas Hosseini, Nima Ansari, Mohamadreza Beikzadeh Moghadam

Iran as a Highly Potential Hub for Primary Aluminium Industry: Opportunities and Challenges ahead
Panthea Geramishoar, Senior Expert, Majid Pourattar, Manager
Characterization of Ni-SiC-CNT nanocomposite coating electrodeposited on AA2024 substrate
M.H. Mosallanejad, A. Shafyei, A. Tahvilian, S. Akhavan

Energy Saving and Influence of the Harmonic Correction Filter on the Power Electric System in primary aluminium smelter
Mehdi Sadeghi
Advanced Radiographic Testing of Commercial Aircrafts Aluminum Structures by Digital Radiography Systems
A. Movafeghi, V. Valamanesh, S. Monem, B. Rokrok and N. Mohammadzadeh
Researching 4Ps Roles toward Each Other from View of Customers to Achieve Success in Marketing by Domestic Aluminum Producers
Majid Bolhasani, Soheil Sarmadsa’idy, Hasan Esma’ilpour
Selection of suitable site for constructing coke plant by AHP and ranking method
Tahereh Khosravi, Mohammad Aghajanlou
Study of separation CO with H2 on carbon nanotube by monte carlo simulation in aluminum smelter
Mohsen Ameri Siahooei, Saeb Sadeghi, Alireza Fardani, Mahmood Taheri Zadeh, Borzu Baharvand
Theoretical study of sulfur gases adsorption in aluminum smelter with carbon nano tube by monte carlo simulation
Ahmad Irannejad, Mohsen Ameri Siahooei, Kambiz Bordbari, Gholam Reza Khayati
Solid-state recycling of aluminium alloy chips through friction stir extrusion (FSE)
Masoud Abdollahi, Reza Abdi Behnagh, Javad Ghasemi, Mohammad Kazem Besharati Givi
Electrochemical Cooling Water Treatment – A New Approach to Control Scale, Biological-fouling, and Corrosion for Aluminum Industry
Zhu Jiekun, Huang Wenxuan