| عنوان | نویسنده (نویسندگان) | دستهبندی | |
|---|---|---|---|
 |
The Effect of Elevated Temperature Homogenization and Extrusion on the Microstructure and Mechanical Properties of Al-Mg2Si in-situ Composite | Rashadoddin Zamani, Massoud Emamy, Hamed Mirzadeh | Advanced materials |
|
Investigation of Wear Properties of Aluminum Matrix Composite with Silica Nano-particles by Stir Casting | Mahdi Molaie, Mahboobe Azadi, Hossein Tavakoli | Advanced materials |
|
Synthesis and Characterization of Metal Hydroxide Nano-Hybrid via Aluminum Salt Slag Recycling Method | Mostafa Mahinroosta, Ali Allahverdi | Advanced materials |
|
Preparation of Various Aluminium Matrix Composites Reinforcing by Nano-Particles with Different Dispersion Methods | Mahboobeh Azadi, Mehrdad Zolfaghari, Saeid Rezanezhad, Mohammad Azadi | Advanced materials |
|
Microstructure and Mechanical Properties of Al1050/Al5052/SiC Multilayered Composite Produced via Accumulative Roll Bonding Process | Moslem Tayyebi, Davood Rahmatabadi, Ramin Hashemi | Advanced materials |
|
On the Preparation and Characterization of Novel Al/CMA Nanocomposite via Powder Technology | Morteza Ghadimi, Roudabeh Sadat Moazeni-Pourasil | Advanced materials |
|
Analysis of Aluminium Structure under Tension Based on Quantum Mechanics | Nasrin Estaji, Mahdi Afshar, Iraj Sattarifar | Advanced materials |
|
Processing of 7075 Aluminum Based Hybrid Composite by Hot-press and Accumulative Roll Bonding | Keyhan Hosseinnejad, Mahdi Soltan Ali Nezhad, Sadegh Ghazvinian, Majid Hossein Zadeh | Advanced materials |
|
Increasing strength of 2024 Aluminum using SiC reinforcement particles | Keyhan Hosseinnejad, Mahdi Soltan Ali Nezhad, Sadegh Ghazvinian, Majid Hossein Zadeh | Advanced materials |
|
In situ synthesis of Fe-TiC/Al2O3 hybrid nanocomposite via mechanical activation-assisted combustion reaction of ilmenite-Al-C system | Morteza Fallahi, Mohammad Khoshghadam Pireyousefan, Sadjad Sabzalian, Mansour Soltanieh, Mandana Adeli | Advanced materials |
|
Characterization of the Graphene Reinforced Aluminum Matrix Nanocomposites Prepared by a Novel Method | Mohammad khoshghadam, Roohollah Rahmanifard Pireyousefan | Advanced materials |
|
Buckling Analysis of Cracked Composite Aluminum Column Using Neural Network | Alireza Nezam Abadi, Milad Nasrollahi, Iman Kalantari | Advanced materials |
|
Effects of Squeeze Casting Parameters on Surface Quality and Mechanical Properties of a LM13 Cast Component | Morteza Hamani, Behzad Niroumand | Casting and solidification |
|
Investigating on the Causes of Wastes in Cam Bearing Part Tiba Produced by Die Casting and Using the SPC and DOE Method to Reduce Them | Hasan Akbari, Amin Nankali, Mehdi Garousi | Casting and solidification |
|
Effect of Aluminum Contents on the Microstructure and Properties of AlxCoCrFeNi Alloys | Maryam Izadi, Mansour Soltanieh, Somaye Alamolhoda | Casting and solidification |
|
Investigation of Mechanism and Causes Pinhole and Strip Break Formation in Thin Aluminum Foil at HEZAR Aluminum Foil Company. | Masoud Hasankhani, Meysam Mohamadi, Alireza Bagherpour | Casting and solidification |
|
Semi-Solid Rheocasting of Al-5Cu-1Ag High Strength Aluminum Alloy | Seyed Sadra Yousefi Bonab, Leila Abadi Marand, Hossein Aghajani, Seyed Reza Damadi | Casting and solidification |
|
Synthesis of Al-Ti-B Master Alloy by SHS Method and Investigation of the Effect of Master Alloy Produced on Grain Size and Hardness of Aluminum Alloy | Hadi Poorbagheri, Hossein Aghajani, Mohammad Roostaei | Casting and solidification |
|
A Study of the Streaking on Aluminum 6063 | khadijah Alaii | Corrosion and surface treatment |
|
The Corrosion Behavior of Powder Thixoforged 520.0 Al Recycled Chips | Kiana Kazemi, Zohreh Nouri, Mohammad Sedighi | Corrosion and surface treatment |
|
Fabrication of Superhydrophobic Surface on the FSW Zone in Friction Stir Welding of Similar Aluminum Alloy | Mohammad Reza Attar, Ali Davodi, Mohsen Haddad Sabzevar | Corrosion and surface treatment |
|
Formation of TiAl3 Coating on Titanium Sheet to Improve the Titanium Oxidation Resistance | Razieh Khoshhal | Corrosion and surface treatment |
|
How to Increase Anodizing Speed, How to Provide Better Quality and How to Reduce Costs in Conventional and Hard Anodizing | Walter Dalla Barba, Marcello Rossi | Corrosion and surface treatment |
|
The Effect of the Chromate Inhibitor on the Aluminium Alloy Superhydrophobic Surfaces | Mohammad Reza Attar,Fateme Pour Eskandariyoon, Ali Davoodi, Ehsan Khajavian, Iman Taji | Corrosion and surface treatment |
|
Effect of Annealing Heat Treatment on Mechanical Properties of 3xxx Series Aluminum Alloys | Mahsa Navidirad, Maziar Azadbeh, Paria Zarei | Heat teatment |
|
Re-Crystallization of 7000 Aluminum Alloy with Minor Amounts of Scandium | Azam Beigei Kheradmand, Shamseddin Mirdamadi ,Saeid Nategh | Heat teatment |
|
The effect of Heat Treatment on Microstructure of the Casting Sheet and Tensile Behavior of AA8023 Rolled Sheet Produced by Twin-roll Casting Process | Mohamad Talebi, Alireza Ghane, Afshin Moghtader | Heat teatment |
|
Experimental Investigation of Mechanical Properties of AA1050 Aluminum Produced by Accumulative Roll Bonding Process | Mohammad Delshad Gholami, Ramin Hashemi, Mohammad Sedighi | Metalworking |
|
Experimental Study of Mechanical Properties and Formability of Ultrafine-Grain Sheet Aluminium Alloy 5083 | Javad Eisaabadi Bozcheloei, Mohammad Sedighi, Ramin Hashemi | Metalworking |
|
Experimental Investigation of Formability of Al/Mg/Al Strips Fabricated via Cold Roll Bonding Process | D.Rahmatabadi, M.Tayyebi, N.Najafizadeh, R.Hashemi | Metalworking |
|
Experimental and Numerical Investigation of Mechanical Properties of Thin-Walled 6063 Aluminum Parts Produced by Liquid Impact Forming | Seyed Davoud Nourbakhsh, Kian Tafazzoli Aghvami | Metalworking |
|
Producing of 6201, 6101 Wire Rod and AAAC Conductors in Alumtek Corporation as the First Producer & Supplier in IRAN | Nazanin Javadi, Ali Yousefi, Reza Habibi | Metalworking |
|
Investigating the Effect of Hot Forming Cold Die Quenching (HFQ) for Equal Channel Angular Pressing (ECAP) of AA2024 Aluminum Alloy | Ali Baghbani Barenji, Ali Reza Eivani, Masood Hashemi Niasari, Hamid Reza Jafarian | Metalworking |
|
Fracture Behavior Investigation of Al/Cu/Mg Multi-Layered Composite Produced by ARB Process | Davood Rahmatabadi, Moslem Tayyebi, Ahmad Sheikhi, Ramin Hashemi | Metalworking |
|
In Situ Synthesis of ZrB2 in Al Matrix by Reactive Spark Plasma Sintering of Mechanically Alloyed Powder | Rezvan Dezfolizadeh, Zohreh Sadeghian | Powder Metallurgy |
|
The Comparison of Oxidation Behavior of Synthesized Fe2Al5 and FeAl | Razieh Khoshhal | Powder Metallurgy |
|
Effects of the Addition of Mg and Raw Material Molar Ratio on the Titanium Aluminide-Aluminia Composite Formation Mechanism | Razieh Khoshhal, Ali Hosseinzadeh | Powder Metallurgy |
|
The Effects of SiC Particles Size on the Microstructural and Mechanical Properties of Al6063 Matrix Composites | Amin Ahangari Asl, Hasan Tavakoli | Powder Metallurgy |
|
The Effect of Friction Stir Vibration Welding Process on Characteristics of SiO2 Incorporated Joint | Mahmoud Abbasi, Mohammad Givi, Behrouz Bagheri | Welding and Joining |
|
Heat Transfer Experimental and Numerical Analysis on HAZ for Outside Corner Joint Welded of Aluminum 5083-H111 sheet | Arash Honaryar, Mehdi Iranmanesh | Welding and Joining |
|
Modified Method to Enhance the Efficiency of Friction Stir Processing | Mahmoud Abbasi, Behrouz Bagheri, Mohammad Givi | Welding and Joining |
|
Friction Stir Vibration Welding of Al5052 Alloys | Mahmoud Abbasi, Mohammad Givi, Behrouz Bagheri | Welding and Joining |
|
Microstructure Evolution and Mechanical Properties of Friction Stir Welded Dissimilar Joints of AA5083 and AA1050 Aluminum Alloys | Davood Gholami, Majid Naseri, Mohammad Reza Aboutalebi | Welding and Joining |
|
CFD-Simulation of Siphone For Primary Aluminum Production | Mohsen Ameri Siahooei, Darioush Hossini Roozbehani | Simulation and automation |
|
Simulation of Friction Stir Processing of Aluminum Alloys Using Artificial Neuron Network System | Arvin Taghizadeh Tabrizi, Hossein Aghajani, Navid Farzam Mehr, Farhad Farhang Laleh, Aytak Homayouni | Simulation and automation |
|
Numerical and Experimental Analysis of Buckling and Post Buckling in Cylindrical Shells with Circular Cutout | Amir Ghiasvand, Hamid Samareh Salavati Pour, Mojtaba Asgari | Simulation and automation |
|
The Effects of Cyclic Extrusion Compression (CEC) Process Variables on Deformation Behavior of Al5052 Alloy | Amirhossein Ghasemi, Mahmoud Abbasi, Mohammad Givi | Simulation and automation |
|
A New Method for Automation and Optimization of Pot lines in Aluminum Factories | Bahman Eskandari, Vahid Rezaei, Salman Shokri, Mostafa Khodarahmi | Simulation and automation |
|
Simulation of Graphene Adding Effect on the Improvement of the Mechanical Properties of Aluminium-Graphene Nanocomposites | Sadegh Sadeghzadeh, Ehsan Takalloo | Simulation and automation |
|
Using Metallurgical Modelling in Process Optimization and Alloy Development in Extrusion of Al-Mg-Si Alloys | Abbas Bahrami, Ali Reza Eivani, Maryam Yazdan Mehr | Simulation and automation |
|
Molecular Simulation of Carbon Monoxide Gas Adsorption on Single Wall Carbon Nanotubes for Prevent of Greenhouse Gas Emissions by Aluminum and Other Industries | Mohsen Ameri Siahooei, Borzu Baharvand | Simulation and automation |
|
An Ultimate Remelt Casthouse – the Garmco Experience | Alain Périers, Benjamin Ulmann, Lee Allen | Miscellaneous |
|
Al Rod Line for “Regional Markets” (۲٫۵ / ۴٫۰ tph capacity) | Carmelo Maria Brocato | Miscellaneous |
|
Recovery of Metals from Red Mud Using Mineral Acids | Zahra Karimi, Ali Allahverdi, Mostafa Mahinroosta | Recycling |
|
Optimized Electromagnetic Stirring in Melting/Holding Furnaces | Joakim Andersson | Recycling |
|
Optimization of Energy Consumption in Primary Aluminum Production by Lowering the Pot Voltage (Case Study:Almahdi Aluminium Smelter) | Dariush Hossini Roozbehani, Mohsen Ameri Siahooei | Raw materials |
|
Effective Parameters on Consumption of Dust Fineness Changes in Green Anode | Morteza Shamsi, Mahmoud Pilehvari | Raw materials |
|
Increase Amperage in Alminium Smelter (Case Study:South Hormoz Aluminium) | Babak Bahamannejad, Ali Mozafar, Pejman Saraf moghadam, Tayeb Kamali,Borzou Baharvand,Mohsen Ameri Siahooei | Raw materials |
|
Investigating the Effect of Coke Aggregate on Gas Consumption in Anode Plant | Mehrdad Beglari, Borzu Baharvand, Mohsen Ameri Siahooei | Raw materials |
|
Numerical Investigation of Magneto-hydrodynamic Flow in an Aluminium Electrolysis Cell | Abolfazl Erfaniyan, Hafez Amani, Eskandar Keshavarz Alamdari | Raw materials |
|
Restarting Frozen Aluminum Pots with Cold Metal Method (Case Study:D20 Technology in South Hormoz Alumiuim) | Babak Bahamannejad, Ali Mozafar, Pejman Saraf moghadam, Tayeb Kamali,Borzou Baharvand,Mohsen Ameri Siahooei | Raw materials |
|
The Effect Distance Between the Anode and Anode Stab of the Space Effect on the Performance of HPGI | Ali Ramezani | Raw materials |
|
The Impact of Intermetallic FeSi and Eutectic Al-Si Composition on Pinhole Defect Emergence in Aluminium Foil 8011 Alloy | Mehran Pakzamani, Mehdi Tima, Amir Akbari Tochaei | Raw materials |
|
The Impact of Production Process on Anode Quality | Naser Kazemi, Mehdi Khosravi,Morteza Shamsi, Mehri Kalbali | Raw materials |
|
Effect of Damper Suction on Anode Spike and AnodeBurn off in Aluminium Electrochemical Cell (Case Study: South Hormoz Co) | Mohsen Ameri Siahooei, Tayyeb kamali | Raw materials |
|
Effect of Aluminum Fluoride in High Calcium Fluoride Content in Aluminum Electrochemical Cell | Tayeb Kamali, Mohsen Ameri Siahooei | Raw materials |
|
Study of Twelve Basic Principles Related to the Bath Height Change Based on Measurements and the Quick and Accessible Monitoring in the Pot Line | Tayeb Kamali, Mohsen Ameri Siahooei | Raw materials |
|
A Systematic Approach to Potline Amperage Creep | Olivier Charette, F. Lamarche, A. F. Schneider, G. Petrolito, A. Rasouli | Raw materials |
|
Fives Embedded Service Robot, One more Step Towards the Single-Man PTM | Ilann Amarm, Jean-Paul Leroy | Raw materials |
چکیده مقالات