برای دانلود اینجا کلیک کنید

abstract-book-2016

Casting:
Numerical Modeling of Macrosegregation in Direct-Chill Casting of Al-Cu Billets
Amin Jafari, S. Hossein Seyedein, M. Reza Aboutalebi, Dmitry Eskin, Laurens Katgerman
Modeling of Non-Equilibrium Solidification of Aluminium-Copper Alloys
M.H. Avazkonandeh-Gharavol, M. Haddad-Sabzevar, H. Fredriksson
Historical Review of Aluminium Degassing and Future Developments
Pete Forakis
Dynamic Nature of Diffusion during Solidification
M.H. Avazkonandeh-Gharavol, M. Haddad-Sabzevar, H. Fredriksson
The Properzi Technology for the Production of Aluminium Rod and Aluminium Ingots
Carmelo Maria Brocato
Assessment of Optimal Conditions in Centrifugally Cast of Aluminium-Brass Bimetal Composite
Morteza Gholami, Mehdi Divandari, Mohammad-Taghi Salehi
The Effect of “Repetitive Corrugation and Straightening by Rolling” (RCSR) Process on the Semi-Solid Microstructure of A356 Aluminium Alloy
Peyman Asghari Rad, Mahmoud Nili-Ahmadabadi, Hassan Shirazi
Effect of Temperature and Al-5Ti-1B Grain Refiner on the Tensile Properties of Commercially Pure Aluminium
Gholamreza Marami, Mir Saman Safavi
Microstructural Assessment and Mechanical Performance of Al-6%Mg-X%Ca Alloy in As-Cast Condition
Gh. Ashuri, M. Emamy, F. Ostadi
Influence of Mg Addition on Microstructural Characteristics and Fracture Toughness of A356/SiCp Composite Castings
H. Tazari, H. Khosravi, F. Abbassi Misheni, S. M. H. Siadati
The Effect of B Elements and Cooling Rate on the Microstructure and Tensile Properties of Al-7%Si-0.5%Mg Alloy
B.Pourbahari, M.Emamy, O.Marjani, M.Lotfpour
Evaluation of Ti Addition and Cooling Rate Effects on the Microstructure and Tensile Properties of Al-4%Cu-3%Si Alloy
B.Pourbahari, M.Emamy, M.Khosravi, M.Lotfpour
Microstructural Evolution of Al-15 (Wt.%)Mg with Al-8B Grain Refiner and Cooling Rate
Mehrab Lotfpour, Masoud Emamy, Hamed Ghorban Nataj, Bita Pourbahari
Microstructural Evolution of Al-4 (Wt.%)Mg with Al-8B Grain Refiner and Cooling Rate
Hossein Norouzi, Masoud Emamy, Ahmad Razaghian
Effect of Twin-Roll Casting Parameters on Mechanical and Microstructural Properties of AA5083-H321 Sheet
A. Hoseinifar, M. Soltan Ali Nezhad

 

Metalworking and Mechanical Properties:
An Investigation on the Mechanical Properties of Al-Mg2Si-SiC Hybrid Composites
Saman Mostafapoor, Masoud Emamy, Ali Mahlouji
The Effects of Friction Coefficient and Strain Rate on the Al5052 Sheets Fabricated by CGP Process
Behzad Teimouri, Hamed Saeidi Googarchin
Application of New Technologies in the Drawing of Aluminium Wire
Enrico Conte, Product Manager Metallurgy
Nanostructured AA6063 Alloy Using Equal Channel Angular Pressing
Soroush Najafi, Mehdi Samaee, Ali Reza Eivani, Hamid Reza Jafarian 
Production of Aluminium Requires High Energy Consumption Using High Quality Row Material Could Reduce Energy Consumption
Mehrdad Beglry, Mohsen Ameri Siahooei, Borzu Baharvand
A Johnson–Cook Model for Deformation Behavior of 2030 Aluminium Alloy under Elevated Temperature
Hamid Reza Rezaei Ashtiani, Peyman Shahsavari, Saeid Mohammadi nejad
Application of Annealing and Accumulative Roll-Bonding Processes for Enhanced Mechanical Properties of Al 1050
Niloofar Hoseini, MohammadReza Toroghinejad
Effects of Zr Element and Solidification Parameters on the Microstructure and Tensile Properties of Al-7%Si-0.5%Mg Alloy
Omid Marjani, Masoud Emamy, Bita Pourbahari
Mechanical Properties of AA2024 in the Presence of Al-Cu Intermetallic Surface Layer
Amin Rabiei Baboukani, Saeid Akhavan, Ahmad Saatchi, Reza Ebrahimi-Kahrizsangi, Ehsan SaebNoori
Experimental Investigation of Microstructure and Mechanical Properties on Twist Extrusion Forming Process of AA6063 Aluminium Alloy
Kasra Shahabi
Analytical and Numerical Modeling of air V-bending for Al3105 Sheets
F .Khoshsima, M. Chegeni, SV. Mohammadi , H. Nayebi, M. Nahvi
Analysis of Stiffness and Dent Resistance in Aluminium Sheets
M. Chegeni, SV. Mohammadi, H. Nayebi,F .Khoshsima, M. Nahvi
Evaluation of Mechanical Properties of High Strength 7075 & 7050 Aluminium Alloys after Single and Multi-Stage Precipitation Hardening Heat Treatments
P. Sh. Naseri, P. Abachi, P. S. Musavigharavi, K. Purazrang
Numerical and Experimental Study of Bursting Prediction in Tube Hydroforming of Al 7020-T6
R. Hashemi, A .Afshar, D. Rahmatabadi

 

Heat Treatment:
Optimization of the Heat Treatment of Rheocast Alloy A356- T6
E.Allahyari, M.Mohammadi Rahvard, M.Shahmiri, M.Salehi
The Effects of Quenching Media and Aging on Residual Stress and Mechanical Properties of 2024 Aluminium Alloy
M.Araghchi, H.Mansouri, R.Vafaei
Effect of Thermo-Mechanical Age Hardening on Strength, Hardness and Elongation in an Al-Cu-Mg Alloy
S. Farmani, Sh. Mirdamadi, S. Bakhshivash, B. MohammadSadeghi
Heat Treatment and Evaluating the Mechanical Properties of Silicon Carbide-Aluminium Alloy Composite
Zahra Alimi, Hadi Sharifi D., Fariborz Faraji, Mojtaba Akbari, Maryam Rahimi 
The Effect of Infrared Rapid Heating on Microstructure and Mechanical Properties of Al Alloy 319
H. Jafarian, H. Saghafian

 

Advanced Materials:
An Investigation of Using Sodium Nitrate as a Foaming Agent of Production Close Cell Aluminium Foam via Powder-Compact Foaming Technique
A. Moloodi, A. Babakhani, M. Haddad Sabzevar
Open-cell Aluminium Foams Reinforced by Alumina Nanoparticles
Toktam Geramipour, Hamid Oveisi
Investigation of Microstructure of A319-matrix in-situ Casting Composite Reinforced with Iron Based Intermetallic Produced by Stir Casting Process
Davood Azadrooy, Hassan Saghafian
Influence of Aging Treatment on Mechanical Properties and Microstructure of Al6061-Nano Al2O3 Composites
Amir Seifoddini, Maede Hasannasab, Vida Abasian
Closed-Cell Aluminium Foam Manufactured by Accumulative Roll-Bonding and Friction Stir Processing
J. M. Milani, T. Saeid
Study the Effect of Strontium Addition on Microstructure, Impact Toughness and Corrosion Behavior of Al-Mg2Si In-Situ Composite
Saeed Farahany, Mansour Bozorg, Nur Azmah Nordin
Al- CNTs Nano-Composite Produced via Double-Pressing Double-Sintering Method
A. Yarahmadi, M. Rajabi, M.T. Noghani & R.Taghiabadi
Influence of Temperature and Pressure on Mechanical Properties of CNTs-Reinforced Aluminium Nano-Composites Fabricated by Double-Pressing Double-Sintering Method
A. Yarahmadi,  M. Rajabi,  M.T. Noghani & R.Taghiabadi
Fabrication and Characterization of Al-Matrix Composites Reinforced with Carbon Nanotube
Leila Shahrdami
The Effects of Rotational Speed on the Microstructure of FGM Hypereutectic Al-17wt%Si Cast via Centrifugal
Ali Farzaneh, Hassan Saghafian
The Effects of Process Parameters on Synthesis of Aluminium Nanoparticles Produced by Electromagnetic Levitational Melting Gas Condensation Method under Helium Atmosphere
Rana Sabouni Tabari, Mohammad Halali
Synthesis and Structural Characterization of Nanocrystalline Al-10at.%Li Powder Prepared by Mechanical Alloying
Mohammad Shirazi, S.A.Khadem, Majid Payamani
Improvements to the Sintering Behavior of Yttria-Stabilized Zirconia Coating by Addition of Aluminium
Mojtaba Ahmadi, Hossein Aghajani
Investigation on the Production of an Al Matrix Composite Reinforced with Metallic Glass Particles Using Equal Channel Angular Pressing (ECAP)
M.R. Rezaei, S.H. Razavi, S.G. Shabestari
Experimental Study and Characterization of Activated Alumina Adsorbent
Shahriar Azarfar, Farshid Noorbakhsh, Mahdi Salmani, Sara Ansari, Rana Soleymani, Sepehr Sadighi
In Situ Synthesis of Aluminium Matrix Surface Composites by Friction Stir Processing
H. Fotoohi, Z. Sadeghian, B. Lotfi
Effect of Graphene on the Mechanical Properties of Al7075-Graphene Nanocomposite Produced by Accumulative Roll bonding
Behnam Shabani, H.Sadeghidamavandi, Alireza Ahmadi, Seyed Hamid Daneshmand
Study of Tribological Properties of Microwave-Sintered CuNi-Al2O3 Nanocomposites
Mohammad Baghani, Mahmood Aliofkhazraei, Reza Poursalehi
Studying Enhancement of Buckling of Composite 2D-FG Cylindrical Shells Produced by Alumina and Aluminium Elements
M. Nasrollahi. B.Naeimi
Glassy State Formation in (Al90Ni8Zr2)100-X Mmx Melt Spun Ribbons
Hamid Reza Asgari Bidhendi , Reza Gholamipour, Farzad Shahri
Effect of Graphite Content on Characteristics Al/40SiC/Gr Hybrid Composites Processed by In Situ Powder Metallurgy (IPM) Method
S. Mahdavi, F. Akhlaghi

 

Welding and Joining:
Thermo-Mechanical Analysis of Tool used in FSW Process of Al 1100 Alloy
Mahmoud Abbasi, Behrouz Bagheri, Rasoul Keivani
Investigation of Using Filler Metal in Friction Stir Welding of Aluminium Foam Sandwich Panels
Farid Bashirzadeh, Tohid Saeid, Javad Mollaei Milani
Effect of Tool Rotational Speed on the Microstructure and Mechanical Properties of Projection Friction Stir Spot Welding of 2024 Aluminium Alloy
Simin Doorandish, Mostafa Mousavizade
Effect of Tool Dwell Time on the Microstructure and Mechanical Properties of Projection Friction Stir Spot Welded 2024 Aluminium alloy
F. Zarghani, S.M. Mosavizade
Experimental Filling Friction Stir Welding of Exit Hole and Numerical Simulation– A Modified Technique to Apply Practically for Pipe AA5456
A.H.Ghavimi, M.R. Aboutalebi, S.H. Seyedin
Effect of FSSW Parameters on Grain Size and Hardness of 6061-T6 Al in Dissimilar Joining to DP590 Dual Phase Steel
Amin Niroumand-Jadidi, Seyed Farshid Kashani-Bozorg
The Influence of Nd:YAG Laser Welding Parameters and Surface Modification on Hot Cracking Behavior of 5456 Al Alloy
Hamid Reza Hekmatjou, Homam Naffakh-Moosavy, Human Sadegh Eghbali
Influence of Pulsed Nd: YAG Welding Parameter on Hot Crack in Aluminium Alloy 5083
Movahed Alahverdi, Farshid Malek, Mohsen Sheikhi
Investigation of Friction Stir Welded Joints of 1050 Aluminum Alloy by Inserting Cu Foils
R. Mokabberi, M. Movahedi, A.H. Kokabi

 

Corrosion and Surface Treatment:
Base Metal Microstructural Considerations for Anodizing Aluminium
Jude Mary Runge, Ph.D.
How to Obtain High Performance in Anodizing with Low Operational Costs, Sludge Reduction and Zero Liquid Discharge
Walter Dalla Barba, Marcello Rossi
Passive Behavior of AA6061 Aluminium Alloy in Borate Buffer Solutions
A. Fattah-alhosseini , Z. Sangari, L. Elahimoghadam
The Effect of Hot Extrusion Conditions on Nanostructure and Corrosion Properties of Anodized AA6063 Alloy
Mehran Mehrzad, Ali Reza Eivani
Investigation Properties Aluminium Coated by Active Screen Plasma Nitriding
M. Soltanieh, K. Taherkhani
Eight Continuous Annealing and Pre-Treatment lines in Operation
Alessandro Casella, Proposal and Sales Manager
Effect of Chloride Ions Concentration on the Passive Behavior of AA6061 Aluminium Alloy
Arash Fattah-alhosseini , Rezvan Azari, Vida Hasanzadeh, Maryam Fereydunifar
Factors Effect on Aluminium Extrusion Streaking Defect
Khadija Alaii
Mechanism Study and Parameter Optimization of A356 Aluminium Alloy Electrochemical Polishing
Ehsan SaebNoori , Ali Navidinejad, Amin Rabiei Baboukani
Effect of Voltaren Drug and Voltaren Expired Drug as a Corrosion Inhibitor for Aluminium in Acid Solutions
K. Rezaei jahromi , C. Dehghanian
Study on the Kinetics of the Growth of Intermetallic Layer on the Surface of CK45 Steel During Hot Dipping Process in Molten Aluminium
A. Bahreini Meimooneh, M. Mirjalili
Evaluation Aluminium Alloy1050 a Corrosion in a Simulated Environment Heller Tower by Polarization Method and Determine the Optimum Conditions for Maintenance
Mahtab Dehghani Firuzabady, Mahmoud Hajisafari, Navid Nasirizadeh
Effect of Grain Size and Oxidation on the Contact Angle of Water with Pure Aluminium
Simin Nosouhian, Mohammad Mirzaei, Behzad Niroumand
Electrochemical Corrosion Behavior of Friction Stir Welded AA6061 in NaCl Solution
Amin Rabiei Baboukani, Saeid Akhavan, Mohammad Rezvani, Ahmad Saatchi
Corrosion Resistance of 6063 Aluminium Alloy by Anodizing Treatment in a Phosphoric Acid, Boric Acid and Oxalic Acid Baths with SEM and TAFEL Study
Neda Niakan , Reza Soleymani , Ahmad Arab, Ramin Mohammad Ali Tehrani
An Investigation on the Effect of Crystal Orientation on Corrosion Behavior of ECAP Processed Aluminium 7075 Alloy
Ashkan Shafiei Alavijeh, Mohsen Saremi
Improvement of 6061 Aluminium Alloys Wear Resistance by Electrodposited Nickel Coating
M. Adabi, A. Amadeh
Cube® Trevisan: the Smart, Efficient Coating Solution
Andrea Trevisan
Analyses increase thickness Aluminium profiles dies or die wear in the direct extrusion (Die life) And How to preserve it
Behrooz Khatami

 

Raw Materials and Reduction Technology:
The Processing of Alumino Silicates for the Purpose of Producing Alumina
A. Scarsella, T. Rothenfluh, Ramin Harraf
Measuring the Effectiveness of Circuit Grinding Coke of Anode Plant at Almahdi-Hormozal Aluminium Complex
Mokhita Vahedi Zadeh, Mohmmad Reza Garmsiri, Seyed Morteza Moosavi Rad , Mohsen Ameri Siahooei, Alireza Fardani
Current Performance Achievements and Future Improvement Orientation of 68 kA Modernization Project in Arak Aluminium Smelter, Iran
Liu Siren, Zhao Xinliang, Xu Lusheng
Choice for Structure of Pre-baked Anode Assembly in 430 kA Aluminium Pot
Wu Xiao-hua
The Roll of Bauxite and Alumina in Iran’s Primary Aluminium Business
Panthea Geramishoar, Mohammad Aghajanlou
Improve the Performance of Bag Filter on Preheating and Calculate the Amount of Fine and Heat Transferred (Case Study: Almahdi-Hormozal Alminium Smelter)
Masoud Rahbari Sisakht,Yousef Rahimi Kashkouli, Alireza Fardani, Mohsen Ameri Siahooei, Mahmood Taheri Zade
Qualitative Investigation of Petroleum Coke Production Condition
Amir Safiri, Sahar Baniyaghoob, Javad Ivakpour, Mohammad Mirarefin
Fives, a Global Technology Provider in the Carbon Sector
Michael Trideau, Christophe Bouché, Romuald Daligaux, Hervé Hite-Pratt, André Pinoncely
Fives’ Sustainable Solutions to Reduce Emissions in the Reduction Sector
Bassam Hureiki, Philippe Martineau, Jean-Nicolas Maltais, Vincent Vérin, Mathieu Frainais, Alain Periers, Antoine de Gromard, Chin. Lim, G. Dobra, M. Cilianu
The Impact Coke Granulation on Pitch Consumption on Carbon Anode
Morteza Shamsi, Mahmoud Pilehvar, Naser Tehrani
The Impact of Butts on Density of Green Anode and Pitch Consumption Rate
Morteza Shamsi, Mahmoud Pilehvari , Mohammad Sadegh Yaghobi
Increasing Aluminium Production Purity in Reduction Cells
Naser Kazemi, Mahdi Khosravi, Mahmoud Pilehvar, Morteza Shamsi
Preheating Anodes without Consumption Energy in Aluminium Reduction Cell
Majid Salehfard, Abbas Jalalvandi, Mahmoud Pilehvari

 

Simulation and Automation:
The Cost-Benefit Analysis of AlPSim and Two other Project for Optimization Consumption Energy (Almahdi Hormozal Aluiminium smelter Case Study)
Maryam Gobadi, Alireza Naseri, Borzu Bahrvand, Mohsen Ameri Siahooei
The Cost-Benefit Analysis of Implementing Level3 Automation and Two Other Project for Optimization Consumption energy (Almahdi Hormozal Aluiminium smelter Case Study)
Maryam Gobadi, Alireza Naseri, Borzu Bahrvand, Mohsen Ameri Siahooei
Simulation of Aluminium Ingot Pot by Neural Network for Temperature Control
Mina Tarahi, Ehsan Ehsaeyan, Fatemeh Mehdizadeh
Green Aluminium Extrusions – Breakthrough Development in Sustainability from UAE to the World
Modar Al Mekdad, Mansoor Ali Khan, Arvind Kumar Sivakumar
Innovative Product Design – Twisted Aluminium Profile at KAIA Airport Saudi Arabia
Modar Al Mekdad, Mansoor Ali, Arvind Kumar
A Study of Plastic Deformation Behavior of AA1050 Aluminium Alloy during Pure Shear Extrusion with Back Pressure
Missam Irani, Mansoo Joun, Amirhossein Meysami, Reza Amini
The effect of porosity and pore shape on the mechanical properties Of Nanoporous Aluminium Single Crystal, Using molecular dynamics simulations
Maryam Mikelani, Masoud Panjepour, Aboozar Taherizadeh

 

Powder Metallurgy:
Preparation and Characterization of Al- 4.5 Mg Alloy by Mechanical Alloying
S. Rastgarnia, Khalil Ranjbar, Kh. Gheisary
Investigation of the Optimum Ratio of Raw Material Stoichiometry to Produce Fe-TiC/Al2O3 Composite
Razieh Khoshhal
The Effect of Aluminium on the Structure and Electrochemical Performance of Li Ni0.5Mn0.3CO0.2 O2 Positive Electrode Materials for Li-Ion Batteries
M. Mohammadi rahvard, M. Ghorbanzadeh, R. Badrnezhad
Metallurgical and Structural Characterization of Novel Al/ β-Al3Mg2 Nanocomposite Synthesized via Powder Metallurgy
Morteza Ghadimi, Mohammad Ali Sourani, Mehdi Vanda
The Effect of Process Parameters on the Combustion Synthesis of Ti-Al/TiC Composite Materials
H. Kalantari, S. Kamali, M. Adeli, M.R. Aboutalebi

 

Miscellaneous:
The Effect of Inferior and Superior Aluminium Industries on the Economy of Iran (Case Stud: Kaveh Khuzestan Aluminium)
Seyed Abbas Hosseini
Investigation of gallium extraction from Bayer solution using Strongly Basic Anionic Exchange Resins
Azad Namdari, Mahmoud Abdollahy, Mohhamad Reza Khalesi
Breakthrough Sustainable Innovation: the Journey behind the Development of 90 Minute Fire Rated Door
Modar Al Mekdad, Arvind Kumar Sivakumar
A Review on Recent Advances on Aluminium for Automotive Applications Focusing on Passenger Cars
Mohammad Iranmanesh
Identify the Challenges of Risk of Investing in the Aluminium Industry’s Supply Chain Performance after the End of International Sanctions
Mohammad Reza Taghizadeh Milani
The Continuous Development of SAMI’s Alumina Technology and Equipment
Li Zhiguo∗, Jiang Yuehua, Zhou
Development and Application of SY Pot Technology in the Last 30 Years
Zhou Dongfang , Liu Yafeng, Liu Ming
The Research and Application of Calcination Technology for the Vertical Shaft Furnace
Zhou Shanhong, Zhou Dongfang
Current Situation and Development Trend of China’s Aluminium Fabrication Industry
Wang Hao
China’s Technology and Equipment for Aluminium Plate/Strip/Foil Production
Wang Hao
Strong Winds of Growth for the Aluminium Industry in India
Shanker Gopalkrishnan

 

Recycling:
Recycling of Aluminium Alloy ADC12 Turning Chips via Mechanical Stirrer
Hasan Akbari, Shahab Kazemi
Recovery of High Pure Alumina from Aluminium Hazardous Waste Using Facile and Inexpensive Method
M. Abbasnia Tehrani, M.A. Kiani, H. Sayahi
The State-of-the-Art and Development of Sidewall Materials for Al Reduction Cells in China
Li Jie, Liu Yun, Wu Jiguang, Zhang Xin